Accsoon
Accsoon Cineview SE
£50
/ day ex VAT
Compatibility | SDI and HDMI camera outputs |
Size / format | 1080p60, up to 4 receivers |
Connections | SDI/HDMI (TX and RX) |
Power | 7.4–16.8 V DC, NP-F or USB-C |
Mount | Cold shoe, 1/4"-20 |
Weight | 210 g per unit |
The Accsoon CineView SE is a wireless video system for sending a camera feed to a separate monitor without running cable. It suits a director or focus puller working away from the camera, on handheld, gimbal or small crew sets.
This kit pairs a transmitter with two receivers. The link uses both the 2.4GHz and 5GHz bands, which helps it stay stable on a busy set, and latency is under 50 milliseconds. A transmitter can be mixed with up to four receivers, tablets or smartphones at once.
It transmits up to 1080p60 over SDI and HDMI, with a line-of-sight range of 1,200ft. A small OLED screen on the transmitter shows status and settings. Each unit runs from L-series batteries, up to 12 hours in use, and the arms and cold shoes supplied let it clip onto camera or receiver rigging. It is a light option for small crews.
Accsoon Cineview SE TX
2× Accsoon Cineview SE RX
6× NP-F970 Battery
NP-F Dual Battery Charger
3× Noga Magic Cine Arm - Small - 1/4''-1/4''
3× Cold Shoe Mount
3× D-Tap to DC Power Cable
3× SDI Cable < 50cm
3× HDMI Cable < 1m
USB Plug
USB-C to USB-A Cable
Micro USB Cable
12× Accsoon Cineview SE Antennas
Wireless performance
Range | 1200 ft (365 m) line-of-sight |
Latency | <50 ms |
Band | Dual-band, 2.4 GHz + 5 GHz simultaneous |
Receivers | Up to 4 per transmitter |
Video
Max format | 1080p, 23.98–60 fps |
TX input | SDI/HDMI |
RX output | SDI/HDMI |
Audio | 44.1/48 kHz, 16/24-bit PCM |
Power
Input | 5.5×2.1 mm DC, 7.4–16.8 V, or 5 V USB-C |
TX draw | 4.5 W typical |
RX draw | 3.5 W typical |
Battery | Sony L-series (NP-F) |
Physical
Weight | 210 g per unit (no antennas) |
Dimensions | 105 × 66 × 32 mm |
Display | 1.3" OLED status screen |
Contact
1 Shacklewell St, London E2 7EG
Delivery across the UK
Newsletter